Liquid Rubber Coating Ponoka, June 17, 2015.

Article: Liquid Rubber Coating Ponoka To Industrial Metal Roof.

Below you will find the process of installing a liquid rubber coating.  June 22, 2014: Crew Arrives on Site to Start Detail Work.  Today we did almost all of our seams, corners and details with mesh and liquid rubber. This took some time because all the seams where lifted and really dirty. We had to do them over all the detail and units we had use trowel grade over all them. There was holes and voids throughout them. We sealed them with liquid rubber brush grade. I will be returning Monday to finish site.
Liquid Rubber Applied Around Unit
Liquid Rubber Applied Around Unit.
Liquid Rubber Applied to Seam
Liquid Rubber Applied to Seam.
Liquid Rubber Detail Work
Liquid Rubber Detail Work.
Liquid Rubber Around Vents
Liquid Rubber Around Vents.
  June 23, 2014: Crew Arrives on Site to Finish Coating.  Today we finished up our prep work. We started rolling rubber, the roof looks really good. I also did the seems in the gutter with mesh and liquid rubber. The roof is 100% complete. Material used. 100 ft of mesh. 6 Pails of brush grade liquid rubber. 2 Pails of trowel grade. 6 paint brushes. 3 rollers and roller cages.
Liquid Rubber Coating
Liquid Rubber Coating
Roof Half Rolled With Liquid Rubber
Roof Half Rolled With Liquid Rubber
Liquid Rubber
Liquid Rubber to lower roof over office.
Liquid Rubber Coating Ponoka
Liquid Rubber Coating Ponoka
  < End of Report > CONTACT US Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. For all other areas of Canada call us at 1.877.497.3528 toll-free. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.  

Engineered Liquid Rubber Metal Roof Recovery Ponoka Alberta, May 2014

Below you will find a series of reports from scope of work to completion for a large industrial metal roofing coating project. The Ponoka roofing repair crew provided the following assessment: Scope of Work, May 12 2014: The metal roof will be completed using two-ply engineered liquid rubber recovery. A pressure wash will be used to cleaning, water testing, and for site assessment. Test and replace fasteners as required to complete roof deck, penetrations, and gutters. We will provide sheet metal repair and penetration saddle fabrication as required, as well as remove old caulking. All:
  • Penetrations
  • Roof-to-wall connections
  • Fasteners
  • Ridge, horizontal sheet seams
  • Hidden gutters, and roof edging at external gutters
will be hand-troweled using mesh and high grade rubber as required. Liquid rubber coating will then be applied, allowing a cure time, followed by a repeated hand trowel process as above. This will be followed by a second coat of liquid rubber. The project manager provided a rationale for using engineered coating as well. Although the industrial standard would have been to recommend reflective elastomeric coating or SPF spray foam, they do not have longevity in a Western Canadian climate. Liquid rubber, on the other hand, has been shown to have a 1200% expansion and contraction rate. The idea was to get the "most mileage" out of the metal roofing, which have a high maintenance turnover due to leaks caused by expansion and contraction of the metal. Expenses also increase with wear and tear caused by corrosion. Using high end engineered liquid rubber polymer in this climate and context would skirt many of these ongoing maintenance problems.
Preparation was dirtier than expected
Preparation was dirtier than expected
Old caulking to be removed
Old caulking to be removed
Contract is approved and work begins, June 22 2014:
Before caulking removal
Before caulking removal
After caulking removal
After caulking removal
The Ponoka roof repair crew arrived on-site and completed work on all seams, corners, and details with mesh and liquid rubber, as detailed. A first coat of trowel and liquid rubber brush-grade was applied.
20140621_122017_resized
Initial coating
20140621_121949_resized
Coating around ventilation systems
20140621_145807_resized
Flat metal roofing coats
  Roof completed, June 23 2014: Gutter seams completed using mesh, second rubber layer coated onto the roof.
Rolling liquid rubber
Rolling liquid rubber
Making progress
Making progress
Finished product
Finished product
< End Report > Code: PON Contact Us Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.