Metal Siding Leak Inspection, September 2015, Edmonton

This client's commercial building bears a flat metal roofing system, but contacted GRS over some concerns that the metal siding around some windows on the upper level had leaked. GRS sent out one of its technicians to inspect the area and provide some advice on the repairs that could be carried out. Inspection Report: September 29, 2015 The technician went on-site and met with the client to discuss the problems with water ingress around the windows on an upper level of the building. They went out to the metal roof and began inspecting the windows and surrounding walls. The leaking areas became quite apparent, and the whole wall could use some patching. The reporting technician then suggested that every window's corners be treated with caulking to divert the water away from the metal edges. This is due to the water's current path, which is to run along the metal and behind the wall. Their estimate was that two crew members would be on-site for a half-day and use around eight tubes of caulking to properly seal the areas. This would, however, be a 'bandage' approach; the proper way to fix the problem would be to first remove the metal around the windows, cut back the wall metal, apply seam tape or spray foam between the metal and the wall, then replace the flashing that has degraded to this point.  
20151013_151528[1]
The client reported water ingress around the windows on the upper levels of the building.
20151013_151531[1]
While the sealant used around the sill had failed, and parts of the metal roof required patching, our technician suggested caulking applications around the corners such that it would divert water away from the existing coatings.
20151013_151556[1]
Here is another example of a portion of the window where water was forming pockets. The rusting is characteristic of water pooling for extended periods of time on the sill, and slowly leaking into the building over time.
20151013_151631[1]
There had also been some tearing at the end of the drip edge on the top of this window. Water had been entering through this hole.
WP_20150929_14_46_20_Pro
Some tearing in the metal siding on the roof had also been another potential leak entry point. The tearing had reached a point that the siding was becoming loose from the wall.
WP_20150929_14_48_39_Pro
Some components also required re-caulking around the base. Cracks in the old sealant had created small holes through which water could enter.
WP_20150929_15_05_58_Pro
There were also windows which had missing screws. Water had been entering the building through the screw holes.
WP_20150929_14_59_46_Pro
Another example of a piping penetration requiring sealing.
WP_20150929_14_59_28_Pro
While our technician was willing to apply a "bandage", the correct approach would have been to spray around the affected areas with foam or seam tape, and then reinstall new flashing.
WP_20150929_14_56_50_Pro
After addressing the windows, we did some water testing around the perimeter of the roof walls to make sure that the seams were watertight.
This report will continue to be updated if/as work proceeds on-site. CODE: 5604 Contact Us Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.

Edmonton Commercial Roof Leak Inspection, April 2014

This Edmonton client required a rooftop inspection to determine where his water leak was originating from. A GRS crew attended and discovered that the entire roof is very unstable and should be replaced as soon as possible. Inspection, April 23, 2014: When I arrived on site I began my leak inspection and noticed there was a very large leak in the middle of his shop. I went on the roof and I noticed 3 to 4 inches of water across the whole rooftop. We pumped off all of the water that we could but with the large amount of rain it was a losing battle. Under further inspection I noticed the roof only had one drain and due to where it was located it wasn't draining properly. This roof is also very soft and unstable, and it feels unsafe like it could cave in at anytime. I advised the customer of my concerns and let him know it would be in his best interest to replace this roof as it it very unstable. I also told him we would come and try to fix his leak when the roof dries up. 3 6 7 10 12 13 16 18 20 < End Report > CODE: 16814 Contact Us 24 Hour Emergency Roof Repair. Telephone: 1.403.873.7663. Email: info@calgaryroofrepair.ca. Mailing: 240 – 70 Shawville Boulevard SE Calgary, Alberta. T2Y 2Z3. For all other areas of Canada call 1.877.497.3528 Toll Free. We service all areas of southern and central Alberta and south east British Columbia including Airdrie, Banff, Calgary, Canmore, Crossfield, Carstairs, Didsbury, Olds, Sundre, Three Hills, Drumheller, Hanna, Brooks, Bassano, Strathmore, Chestermere, Irricana, Cochrane, Black Diamond, Okotoks, Priddis, Bragg Creek, Cranbrook, Fernie, Panorama, High River, Vulcan, Medicine Hat, Lethbridge, Taber, Sylvan Lake, Red Deer and other Alberta rural points between.