Leduc Metal Roof Repairs, June 17, 2015

Article: Liquid Rubber Spot Repairs to an Industrial Roof in Leduc, Alberta.

Metal roofing expands and contracts more than any other roofing material. The expansion and contraction of seams, fasteners, flashing, gutters and curbs causes leaks. Below is a site report from a repair crew that did metal roof spot repairs to an industrial location in Leduc, Alberta. June 10, 2014: Crew Arrives On-Site for Roof Inspection and to Assess What Material Needed. 7010 45 Street Leduc Alberta.
Materials:
  • 2 pails of liquid rubber.
  • 1 pail trowel grade.
  • 3 tubes caulking.
  • 10 to 12 man hours.
Gutter Needing Repair
Blistering adjacent to a gutter system, with exposed pockets along the edge.
Old Repairs Failing
Old asphalt-based repairs failing along the parapet walls.
Old Repair
Asphalt-based products are most prone to sun (UV) damage. This old repair was past its age due to sun exposure over time, with no touch-ups applied.
  June 18, 2014: Our Leduc Roofing Repair Crew Arrives On-Site for Repairs. Today we cleaned the roof with the pressure washer including the gutter. The gutter took awhile as it had three inches of mud in it. By the end of the day we got most of the units done and the ridge cap complete. I would say about 60% complete. Tomorrow we will finish the gutters and fasteners. We will have site 100% complete tomorrow weather permitting.
Liquid Rubber Applied
Liquid rubber coatings applied to the curb of a rooftop unit.
Liquid Rubber Spot Repairs
Spot repairs using liquid rubber coatings to the metal roof seams and solar tube/skylight curbs.
Liquid Rubber around Vents
Liquid rubber coatings around the base and detailing on vents.
June 20, 2014: Crew Arrives on Site for Completion of Work.  Today we finished all the units and details. I got the other technicians to start the fasteners as we worked on the gutters. We had to coat and line the whole thing with liquid rubber and cloth and then a second coat of liquid rubber. When we finished we helped finish the fasteners and the roof was complete. I got the customer to come up to the roof and do a walk through. He was happy with the work. Materials:
  • 5 Pails of liquid rubber brush grade.
  • 1 pail trowel grade.
  • 2 rolls of 6 inch x 100 ft. rolls of mesh.
  • 6 paint brushes.
  • 2 rollers.
Liquid Rubber Spot Repairs Leduc
Various solar tubes and deficient sections around the standing seams requiring liquid rubber spot coatings.
Liquid Rubber Gutter Coating
Coatings were applied over the entire length of the gutters.
Liquid Rubber Spot Repairs
Coatings over the eave edge to internal gutter area, which initially had blistering and exposed pockets running the length of the system.
Liquid Rubber Spot Repair Coating
Closeup of the coatings at the gutter-eave connection.
< End of Report > CONTACT US Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. For all other areas of Canada call us at 1.877.497.3528 toll-free. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.

Liquid Rubber Coating Ponoka, June 17, 2015.

Article: Liquid Rubber Coating Ponoka To Industrial Metal Roof.

Below you will find the process of installing a liquid rubber coating.  June 22, 2014: Crew Arrives on Site to Start Detail Work.  Today we did almost all of our seams, corners and details with mesh and liquid rubber. This took some time because all the seams where lifted and really dirty. We had to do them over all the detail and units we had use trowel grade over all them. There was holes and voids throughout them. We sealed them with liquid rubber brush grade. I will be returning Monday to finish site.
Liquid Rubber Applied Around Unit
Liquid Rubber Applied Around Unit.
Liquid Rubber Applied to Seam
Liquid Rubber Applied to Seam.
Liquid Rubber Detail Work
Liquid Rubber Detail Work.
Liquid Rubber Around Vents
Liquid Rubber Around Vents.
  June 23, 2014: Crew Arrives on Site to Finish Coating.  Today we finished up our prep work. We started rolling rubber, the roof looks really good. I also did the seems in the gutter with mesh and liquid rubber. The roof is 100% complete. Material used. 100 ft of mesh. 6 Pails of brush grade liquid rubber. 2 Pails of trowel grade. 6 paint brushes. 3 rollers and roller cages.
Liquid Rubber Coating
Liquid Rubber Coating
Roof Half Rolled With Liquid Rubber
Roof Half Rolled With Liquid Rubber
Liquid Rubber
Liquid Rubber to lower roof over office.
Liquid Rubber Coating Ponoka
Liquid Rubber Coating Ponoka
  < End of Report > CONTACT US Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. For all other areas of Canada call us at 1.877.497.3528 toll-free. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.  

Roof Coating Edmonton. Metal Roof. June 15, 2015.

Article: Industrial Liquid Rubber Metal Roof Coating Edmonton, Alberta.

The roof report below outlines the application scope of work for a liquid rubber roof coating to an industrial standing seam metal roof in Edmonton, Alberta. Roof Coating Edmonton. Roof coatings have been around almost as long as metal roofing has. At issue however, especially in Canada, is finding a roof coating that actually performs to its suitable use and purpose. The purpose of a roof coating is to extend the life of your metal roof and to provide leak free service during that extension of time.
If the coating doesn't provide leak free service and does not therefore extend the life-cycle of your metal roof your money is then lost.
There are two primary reasons roof coatings (specifically in Canada) typically do not fulfill expectations. The first reason is that many of the coatings that are used in Canada are not designed for the harsh weather we have in Canada - specifically the cold temperatures, brutal damage caused by ice dams and the weight of snow loads. The other reason is that the coating itself is just part of the job. In other words, the whole scope of work is what makes a roof coating work properly.
Applying the coating is just a small part of a successful roof coating.
To understand the full scope of work required in Canada for a roof coating to be successful, visit this link to our local Edmonton Roof Repair website and watch the metal roof coating video. It explains in detail what is required for a roof coating in Canada to work. Our roof coatings extend the country from the west coast to eastern Canada and everywhere between. We now coat millions of square feet of liquid rubber in Canada and our crews have become leaders in the industry as a result. I can confidently state the we are one of, if not the largest roof coating companies in Canada. Our clients include everyone from farm owners, acreages, mills, large commercial operations to industrial complexes to oil and gas sites. We have coatings on buildings at mines in the mountains, mills, on tanks, in ponds, on roofs, on foundations, industrial gutters, waterproofing walls and almost everywhere you could image waterproofing to be required. Below is a report from Edmonton, Alberta. In 2013 this client asked us to perform spot roof repairs with liquid rubber to the lower metal roof. The next year (in 2014) they had us back to do spot repairs to the larger upper metal roof at their plant and to coat the complete lower roof included an internal hidden gutter. To this point we haven't had a call-back for any leaks and the customer is very satisfied with the result. August 22, 2014: Roof Coating Crew Arrives First Day For Work.  Site Location: 5604 59 Street NW Edmonton, Alberta. We accomplished getting all the units except for one and all the penetrations waterproofed on the upper shop roof with liquid rubber and mesh and/or seam tape (which was 18 units and about 50 penetrations). All units where meshed and sealed with liquid rubber. Tomorrow we will get all the metal roof seams waterproofed (which is about 2100 lineal feet) and we probably won't start the office roof coating until late tomorrow.
Roof Coating Edmonton, Alberta. Liquid Rubber. Metal Roof. Industrial.
Roof Coating Edmonton, Alberta. Liquid Rubber. Metal Roof. Industrial. Before photo.
Metal Roof - Roof Coating Edmonton, Alberta.
Metal Roof - Roof Coating Edmonton, Alberta.
Old Patch Work to roof that cracked and peeled (asphalt product).
Old Patch Work to roof that cracked and peeled (asphalt product).
Full Roof photo of lower office roof. Liquid rubber prep started at seam.
Full Roof photo of lower office roof. Liquid rubber prep started at seam.
Crew Member Starting Liquid Rubber Meshing Around Unit
Crew Member Starting Liquid Rubber Meshing Around Unit
  August 24, 2014: Crew Arrives Back On Site.  Today the crew got almost all the seams on the upper shop roof all sealed in with liquid rubber, and the bad ones with mesh and liquid rubber. I have about 150 feet left to finish in the morning and then we will be starting the coating on the lower office roof.
Mesh Before Liquid Rubber
Mesh Before Liquid Rubber
Liquid Rubber
Liquid Rubber
Liquid Rubber Around Penitration
Liquid Rubber Around Penetration
Liquid Rubber Seam
Liquid Rubber Seam
  August 25, 2014: Crew Arrives Back On Site. Today we finished all the units and penetrations on the office roof. We also got half the roof rolled (coated). We are on schedule for site completion tomorrow.
Liquid Rubber Half The Roof Completed
Liquid Rubber Half The Roof Completed
Liquid Rubber To Metal
Liquid Rubber To Metal
Liquid Rubber Coating To Half The Roof
Liquid Rubber Coating To Half The Roof
Liquid Rubber Coating
Liquid Rubber Coating
  August 26, 2014: Crew Arrives On Site And Completes Job.  Today we were down a guy, but we managed to finish the lower shop roof coating completely. When job was finished I did a site walk through with the customer and he was very happy with the work.
Liquid Rubber Coating Completed
Liquid Rubber Coating Completed
Liquid Rubber Coating In Edmonton
Liquid Rubber Coating In Edmonton
Liquid Rubber To Commercial Building
Liquid Rubber To Industrial Building Lower Roof
Liquid Rubber Coating
Liquid Rubber Coating
  < End of Report >   CONTACT US Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.

Nisku Metal Roof Liquid Rubber Coating, June 5 2015

Article: Metal Roof Coating. Teal Colored Liquid Rubber to Metal Roof in Nisku Alberta. Industrial Ribbed Panel.

Metal Roof Coatings. Considerations When Choosing Metal Roof Repair, Refurbishment and Maintenance. Metal roof systems don't last forever and will eventually require repair, maintenance, replacement or refurbishment of some kind. In central and northern Alberta metal roof systems experience significant expansion and contraction of panels. This expansion causes the fastener holes to become larger, causes fasteners to loosen, panels will come apart and the rooftop vents and other penetration areas are prone to leakage. Also, snow and ice can build-up at the eaves-trough and back up under the panels causing leaks. One method to repair or refurbish a metal roof is a metal roof coating. In this example our customer was experiencing various intermittent leaks. The leaks were primarily in the winter and spring - ice damming and snow melt were causing leaks. The challenges and considerations when coming to the right solution for our client were:
  1. The allowable budget did not allow for a complete metal roof replacement.
  2. Recovery systems such as putting another metal roof over-top or a membrane such as EPDM, TPO or PVC. All scenarios has disadvantages due to weight, cost, and street view.
  3. Spray foam (spf) was considered but the main motivating factor was waterproofing the roof and not R value. Spray foam shouldn't be considered unless R value is a significant reason to consider it.
  4. The client did not want to risk spot repairs and the aggravation with possibly having to do spot repairs year after year.
  5. Standard metal roof coatings in the market were considered, but conventional roof coatings do not last very long in extreme climates like central and northern Alberta.
  6. Liquid rubber was highly considered because of its success in cold climates, but the challenge was that that it comes in black and this particular roof wasn't a low slope industrial roof that you do not see from the street. It is a sloped industrial roof that is part of the street view facade.
  7. The customer chose liquid rubber with an acrylic color coating over the black liquid rubber knowing that at some point the acrylic coating would need to be re-painted on as acrylic will eventually start to peel and crack. This option solved the problem of street view appearance and also waterproofing the metal roof.
August 22, 2014: Journeyman Arrives On-Site for Metal Roof Leak Inspection and Assessment. 
We arrived on site and spoke with the maintenance manager. He showed us two leaks on west side of the building. When I attended to the roof and inspected the panels, fasteners and flashing I did not observe any obvious sign of the leaks. It was determined that due to when the leaks occur (winter and spring with ice damming and snow melt) that a roof coating would be best. Our customer does not want spot repairs and wants the problem solved for some time.
Metal Roof With Leaks
Metal Roof With Leaks. Ribbed panels. Exposed fasteners.
Metal Roof
Metal Roof canopy or skirt area.
Leak From Inside
Leaks inside building showing up as brown spots on ceiling tiles.
Building With Leak
Building in Nisku with metal roof leaks.
  October 15, 2014: Roofing Crew Arrives to Coat Metal Roof.
We arrived on site and conducted the morning safety meeting. The scope of work today was an acrylic roof coating color match and liquid rubber coating to base to complete lower roof. We couldn't roll the acrylic product on for some reason (it would change color in spots - we think due to specific blend), so we had to brush the whole roof. Brushing was the only way to get the acrylic to look good and consistent with the color that was already on there. Completed the whole roof and had it coated by the end of the day. The discoloring you see in the photos below are due to drying (curing) of acrylic coating. After about 30 mins the darker areas blended with the lighter areas.
Liquid Rubber Coating With Aycrilic
Liquid Rubber Coating With Acrylic Teal Color in Nisku, Alberta.
Liquid Rubber With Aycrilic
Liquid Rubber With Acrylic Top Coating. Discoloring corrected itself when complete roof dried and cured and coloring became consistent.
Liquid Rubber Coating
Liquid Rubber Acrylic Colored Coating.
Liquid Rubber
Liquid Rubber coating to metal panel roof with exposed fasteners.
  View this video to review the scope of work for application of a metal roofing coating.   < End of report >   Contact Us Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.