Edmonton Commercial Roof Repair Quotation, September 2014

This client reached out to GRS to receive a quotation for repairs to their commercial residential building. They included a report (from which the subsequent photos and their captions are obtained), which allowed us to return a quotation for the repairs they sought. Client's Report Received: September 17, 2014 The client sent their report into the GRS office, detailing problems with the current roof and explaining what kind of services they would like performed in the various problem spots. This allowed our account representative to deliver and present an accurate quote for the repairs, in addition to positioning the possibility of a roof replacement as had been discussed with the client in prior communications. GRS Note: The photos and comments below were included in an Inspection Report carried out by a third-party and, while informative, may not fully represent the opinions of GRS. Sometimes clients will submit their own photos or reports that they've independently sourced; all of this information helps us build a proper quote without needing to physically arrive on site. Roof Slope: Flat Membrane Type: Built-Up-Roof (BUR)
Overview of the existing roof. Roof membrane is in fair to poor condition.
Overview of the existing roof. Roof membrane is in fair to poor condition.
Overview of the existing roof. Roof membrane is in fair to poor condition.
Overview of the existing roof. Roof membrane is in fair to poor condition.
View of exposed membrane experiencing increased deterioration. Area should be scraped clean, reinforced, and new protective surfacing applied. This deficiency was observed at multiple locations.
View of exposed membrane experiencing increased deterioration. Area should be scraped clean, reinforced, and new protective surfacing applied. This deficiency was observed at multiple locations.
At two corner (both Northeast facing corners) locations the protective surfacing has deteriorated, exposing the roof membrane. These locations should be swept clean and new protective surfacing applied.
At two corner (both Northeast facing corners) locations the protective surfacing has deteriorated, exposing the roof membrane. These locations should be swept clean and new protective surfacing applied.
Multiple membrane blister locations noted throughout the roof. All blisters should be cut out and new membrane complete with protective surfacing installed.
Multiple membrane blister locations noted throughout the roof. All blisters should be cut out and new membrane complete with protective surfacing installed.
Protective surfacing has failed at various curb locations leaving the roof membrane exposed. Locations should be swept clean and new protective surfacing applied.
Protective surfacing has failed at various curb locations leaving the roof membrane exposed. Locations should be swept clean and new protective surfacing applied.
Drain location should be swept clean to allow for the application of new protective surfacing. In addition, a debris screen should be installed to prevent drain blockages from occurring.
Drain location should be swept clean to allow for the application of new protective surfacing. In addition, a debris screen should be installed to prevent drain blockages from occurring.
Membrane protection should be installed beneath all rooftop equipment to prevent membrane damages from occurring.
Membrane protection should be installed beneath all rooftop equipment to prevent membrane damages from occurring.
At multiple curb locations, screws have been installed through the metal flashings and into the membrane creating a hole. It is possible that moisture entry will occur at these locations. Repairs should be carried out on the underlying membrane.
At multiple curb locations, screws have been installed through the metal flashings and into the membrane creating a hole. It is possible that moisture entry will occur at these locations. Repairs should be carried out on the underlying membrane.
Image 10
At multiple locations along the parapet walls, screws have been installed through the metal flashings and into the membrane creating a hole. It is possible that moisture entry will occur at these locations. Repairs should be carried out on the underlying membrane.
Newly installed metal flashings have been poorly secured into place. Fasteners have broken through the metal flashings at isolated locations. New metal flashings have been installed directly over the original metal flashings.
Newly installed metal flashings have been poorly secured into place. Fasteners have broken through the metal flashings at isolated locations.
New metal flashings have been installed directly over the original metal flashings.
View of wind damage to metal flashings. Additional securement of the metal flashings is recommended.
View of wind damage to metal flashings. Additional securement of the metal flashings is recommended.
The newly installed metal flashings have blown off at this location exposing the original metal flashings.
The newly installed metal flashings have blown off at this location exposing the original metal flashings.
Image 14
Debris buildup around the drain screen should be removed to allow for optimal drainage.
Image 15
Sealant installed onto storm collar has deteriorated and is no longer functioning as intended. Existing sealant should be removed and new sealant applied.
Conclusion:
This report is based on visual observations of the roof system. No destructive testing was conducted to analyze the underlying components of the roof system. With proper maintenance the remaining service life of the roof system is approximately Three (3) to Six (6) years. Maintenance should include installing protective surfacing, repairing membrane deficiencies, repairing membrane blisters, securing metal flashings, installing drain screen, installing membrane protection, removing debris from the drain screen and applying sealant to the storm collar. < End of Third-Party Inspection Report >
Quotation Delivered: After reviewing the thorough report submitted by the client, our account representative calculated a quote for repairs, as well as roof recovery and replacement options. They were returned to the client for their consideration, and we awaited their response. < End Report > CODE: 10040 Contact Us Call our 24 hour emergency roof repair at 1.780.424.7663. Mail to: 3428 99 Street NW Edmonton, Alberta T6E-5X5. We service all of Alberta including Edmonton, Stony Plain, Spruce Grove, Fort Saskatchewan, St Albert, Sherwood Park, Leduc, Nisku, Beaumont, Lac La Biche, Grande Prairie, High Level, Westlock, Slave Lake, Edson, Drayton Valley, Devon, Camrose, Wetaskiwin, Tofield, Lamont, Morinville, Vegreville, Tofield, Millet, Calmar, Evansburg, Redwater, Onaway, Viking, Athabasca, High Prairie, Valleyview, Fairview, Peace River, Whitecourt, Mayerthorpe and many more rural areas and towns.

Leave a Reply